SHOWER FLOORS

PENTELIC – SHOWER FLOORS WITH LINEAR DRAIN

WDA-3705-3760

Product Details

PENTELIC - SHOWER FLOORS WITH LINEAR DRAIN
WDA-3705-3760
new ADA compliant linear drain terrazzo shower floor
The 14 gauge stainless steel grate is secured to the terrazzo shower floor. Under the grate is a 2” bottom outlet brass drain which cast integral.
Dimensions
WDA-3705 40x38”/ grate is 5” wide x 36” long
WDA-3730 64x32” / the grate is 5” wide x 60” long
WDA-3760 64x38” / the grate is 5” wide x 60” long
Download File(s)
WDA-3705-3760(PDF) / WDA-3705-3760 Series (RFA)

PENTELIC ROLL-IN TYPE (ADA)

pentelic-3430

Product Details

PENTELIC ROLL-IN TYPE (ADA)
WDA-3430 - WDA-3460
Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor. These shower floors must be set on a level grout or mortar bed.

The intent is to allow a wheelchair patient to remain seated in the wheelchair and roll into the shower. This model must be recessed into the building floor to allow unobstructed wheelchair entry.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). The above models conform to 2010 ADA standards for accessable design and A.117.1–2009.
Inside Deminsions: (A) 36x36" inside, (B) 60x30" inside, (C) 60x36" inside
Dimensions
WDA-3405 - 40x38" (A)
WDA-3430 - 64x32" (B)
WDA-3460 - 64x38" (C)
Download File(s)
WDA-3405-3460 (PDF) / WDA-3400-3460 (RFA)
WDA-3405-3630 (PDF) / WDA-3400-3460 (RFA)

PENTELIC RAMP TYPE (ADA)

WDA-3605

Product Details

WDA-3605, WDA-3630, WDA-3660
WDA-3605 - WDA-3660
Pentelic Roll-In Type Shower Floor with Ramp. Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor. These shower floors must be set on a level grout or mortar bed.

The intent is to allow a wheelchair patient to lift one’s self onto a transfer seat with the assistance of a grab bar. This transfer type shower floor has an integral cast 12” ramp with a running slope of 1:12. A stainless steel cap covers and protects the leading 6” of the ramp. A floor drain by others at the entrance to the sloped threshold and a collapsible water dam (Option: -RDM) are recommended for added protection.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). The above models conform to 2010 ADA standards for accessable design and A.117.1–2009.
Inside Deminsions: (A) 36x36" inside, (B) 60x30" inside, (C) 60x36" inside
Dimensions
WDA-3605 - 40x38" (A)
WDA-3630 - 64x32" (B)
WDA-3660 - 64x38" (C)
Download File(s)
WDA-3605, WDA-3630, WDA-3660 (PDF) / WDA-3600-3660 (RFA)

TRIESTE BACK OUTLET

54-trieste-BO

Product Details

52-BO, 54-BO
52-BO - 54-BO
When structural consideration demands, this floor allows drain to be put directly into pipe chase. Provides freedom of design. 2" F.I.P.S. brass drain is centered on the back dimension, and has a removable chrome-plated brass strainer.Also available in other Trieste sizes as well as in Parian, Pentelic, Serpentine and Sussex series. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions For off-the-floor rough in, 1 Threshold, 3 Flange
52-BO - 32x32"
54-BO - 36x36"
Download File(s)
BO-52,54 (PDF) / BO-52,54 (RFA)

TRIESTE RECTANGULAR

88 Trieste RECTANGULAR

Product Details

88 Trieste Rectangular
82 - 94.5
WIDE INTEGRAL THRESHOLD. Easily accommodates glass or plastic doors.
Our most popular series. Three sides are flanged for built-up construction. Model with threshold on long dimension is available in 12 sizes. Model with threshold on short dimension is designed especially for retrofit situations. All floors have a 2" centered brass drain with removable flat snap-in stainless steel strainer.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions Threshold on long dimension.
82 - 36x32"
83 - 42x32"
83.2 - 42x34"
83.5 - 42x36"
84 - 48x32"
84.2 - 48x34"
84.5 - 48x36"
86 - 54x32"
88 - 60x32"
88.2 - 60x34"
88.3 - 60x30"
88.5 - 60x36"

Threshold on short dimension
92 - 32x36"
94 - 36x42"
94.5 - 36x48"
Download File(s)
82-94.5 (PDF) / 82-88.5 (RFA), 94 (RFA), 92-94.5 (RFA)

TRIESTE SQUARE

54 Trieste square

Product Details

54 Trieste Square
50 - 66
WIDE INTEGRAL THRESHOLD. Easily accommodates glass or plastic doors.
Choice of styles for greater design flexibility. For a corner shower, specify model with two sides flanged and threshold on two sides. For recessed installation, specify model with three sides flanged and threshold on one side. All floors have a 2" brass drain with removable flat snap-in stainless steel strainer.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions Threshold on one side Flange on three sides.
50 - 30x30"
52 - 32x32"
53 - 34x34"
54 - 36x36"
56 - 40x40"
57 - 42x42"
58 - 48x48"

Threshold on two adjacent sides Flange on two adjacent sides
62 - 32x32"
64 - 36x36"
66 - 40x40"

WHEELCHAIR SHOWER FLOORS - Three sides flanged, ramped threshold
54-HC - 36x36"
84.5-HC - 48x36"
98-HC - 60x60"
Download File(s)
50-66 (PDF) / 50-58 (RFA), 62-66 (RFA)
54-HC, 84.5-HV, 98-HC (PDF) / 54-HC-84.5-HC (RFA), 98-HC(RFA)

TRIESTE NEO-CORNER

43 Trieste Neo Corner

Product Details

43 Trieste Neo Corner
42 - 46
WIDE INTEGRAL THRESHOLD. Easily accommodates glass or plastic doors.
The two wall sides of this space-saving shower floor are flanged for built-up construction on the job. Wide integrally cast terrazzo threshold on three sides forms a perfect base for glass or plastic enclosure and saves the cost of a tiled threshold.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm) Dimensions 42 - 32x32"
43 - 34x34"
44 - 36x36"
45 - 38x38"
46 - 40x40"
Download File(s)
42-46 (PDF) / 42-46 (RFA)

SERPENTINE WHEELCHAIR

WS-3200

Product Details

Institutional Shower Floor SERPENTINE Wheelchair Shower Floor with Stainless Steel Cap
WS-3200 - WS-3505
Institutional 6” sidewall; Barrier Free
WS-Series SERPENTINE shower floor for the handicapped with 6" stainless steel entry cap on integral ramp, available in recommended several sizes, with tiling flange on the remaining 3 sides for a water tight joint between the wall and shower floor.
Option(s): RDM Collapsible Water Dam recommended (HC, WDA, WS Series)
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm)
Notes: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm) Dimensions WS-3200 - 36x36"
WS-3500 - 48x48"
WS-3501 - 60x48"
WS-3502 - 60x60"
WS-3503 - 42x70"
WS-3504 - 48x70"
WS-3505 - 60x70"
Download File(s)
WS-3200-3505 (PDF) / WS-3200-3505 (RFA)

SERPENTINE ROLL-IN MODEL

WH-2200

Product Details

Institutional Shower Floor SERPENTINE Wheelchair Shower Floor
WH-2200 - WH-3000
Institutional 6” sidewall; Barrier Free
WH-Series . . . handicapped accessible shower floor with lower than normal threshold to assist the aged and infirmed . . . ideal for nursing homes, retirement villages and apartments. Must be recessed 2" into the subfloor for barrier free access. 2" brass drain with removable flat snap-in stainless steel strainer is standard.
Option(s):
-RDP Removable Aluminum Alumni Ramp(WH Series)
NOTE:
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm)
Dimensions WH-2200
WH-2400
WH-2500
WH-2600
WH-2700
WH-2800
WH-2900
WH-3000
Download File(s)
WH-2200-3000 (PDF) / WH-2200-3000 (RFA)

SERPENTINE BACK OUTLET DRAIN

34-BO

Product Details

Institutional Shower Floor SERPENTINE Back Outlet Drain
34-BO
FLANGED and/or rabbet or off-the-floor roughing.
High 6” side wall. Specify plain shoulders (i.e.: 34-BO) for installation flush against room wall. Specify tiling flanges for tile wall construction (i.e.: 34-BO-FFF three tiling flanges) or cast rabbets (i.e.: 34-BO-R provide rabbet configuration) to hold precut, drop-in panels of partitioning material.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm) Dimensions 34-BO - 36x36"
Download File(s)
34-BO (PDF) / 34-BO (RFA)

SERPENTINE DOUBLE DRAIN

36-DD

Product Details

Institutional Shower Floor SERPENTINE Double Drain
36-DD
High 6” side wall. Specify plain shoulders (i.e.: #36-DD) for installation flush against room wall. Specify tiling flanges for tile wall construction (i.e.: #36-DD-F3 three tiling flanges) or cast rabbets (i.e.: #36-DD-R provide rabbet configuration) to hold precut, drop-in panels of partitioning material. Dimensions 36-DD - 72X36"
Download File(s)
36-DD (PDF) 36-DD (RFA), 36-D (RFA)

SERPENTINE SQUARE & RECTANGULAR

34-Single-drain

Product Details

Institutional Shower Floor
34 - 36-DD
High 6” side wall. Specify plain shoulders (i.e.: #34) for installation flush against room wall. Specify tiling flanges for tile wall construction (i.e.: #34-FFF three tiling flanges) or cast rabbets (i.e.: #34-R provide rabbet configuration) to hold precut, drop-in panels of partitioning material. Dimensions 34 - 36x36"
34-NC - 36x36"
34.5 - 48x36"
36-D - 72x36"
Download File(s)
34, 34.5, 36-D (PDF) / 34 (RFA), 36-D (RFA), 34.5-36-D (RFA)

SERPENTINE NEO-CORNER

34-NC

Product Details

Institutional Shower Floor SERPENTINE Neo-Corner
34-NC
FLANGED ALL SIDES For threshold to be built on the job.
High 6” side wall. Specify plain shoulders (i.e.: #34-NC) for installation flush against room wall. Specify tiling flanges for tile wall construction (i.e.: #34-NC-F3 three tiling flanges) or cast rabbets (i.e.: #34-NC-R provide rabbet configuration) to hold precut, drop-in panels of partitioning material.
Dimensions 34-NC - 36x36"
Download File(s)
34-NC (PDF) / 34-NC (RFA)

PARIAN RAMP TYPE

Ramp Type

Product Details

PARIAN RAMP TYPE / Three sides flanged*
WDA-3600 - WDA-3620
Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor. These shower floors must be set on a level grout or mortar bed.

The intent is to allow a wheelchair patient to lift one’s self onto a transfer seat with the assistance of a grab bar. This transfer type shower floor has an integral cast 12” ramp with a stainless steel cap that covers and protects the leading 6” of the ramp. A floor drain by others at the entrance to the sloped threshold and a collapsible water dam (Option: -RDM) are recommended for added protection.
NOTE: * Note: Flanges are intended to be used with wall tile applied by others to conform with Federal, state and local shower stall dimensions. Floors can be supplied less flanges (-LF). Dimensions WDA-3600 - 39x39"
WDA-3610 - 60x30"
WDA-3620 - 60x36"
Download File(s)
WDA-3600-3620 (PDF) / WDA-3600-3660 (RFA)

PARIAN ROLL-IN TYPE

ROLL-IN TYPE

Product Details

PARIAN ROLL-IN TYPE / Three sides flanged*
WDA-3400 - WDA-3420
Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor.These shower floors must be set on a level grout or mortar bed.
The intent is to allow a wheelchair patient to remain seated in the wheelchair and roll into the shower. This model must be recessed into the building floor to allow unobstructed wheelchair entry.
NOTE: Flanges are intended to be used with wall tile applied by others to conform with Federal, state and local shower stall dimensions. Floors can be supplied less flanges (-LF). Dimensions WDA-3400 - 39x39"
WDA-3410 - 60x30"
WDA-3420 - 60x36"
Download File(s)
WDA-3400-3460 (PDF) / WDA-3400-3460 (RFA)

SUSSEX RECTANGULAR

32-Sussex

Product Details

SUSSEX RECTANGULAR
32
FLANGED ALL SIDES For threshold to be built on the job.
Choose rectangular models for recessed installations. Rectangular model produces the largest area for showering.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions 32 - 48x32"
Download Files
32 (PDF) / 32 (RFA)

SUSSEX SQUARE

24-sussex

Product Details

SUSSEX SQUARE
22
FLANGED ALL SIDES For threshold to be built on the job.
Choose square models for recessed installations. Square unit is available in 3 sizes for flexibility in design.
Dimensions 22 - 32x32"
24 - 36x36"
26 - 40x40"
Download Files
22-26 (PDF) / 22-26 (RFA)

SUSSEX NEO-CORNER

14-Sussex

Product Details

SUSSEX NEO-CORNER
14 - 16
FLANGED ALL SIDES For threshold to be built on the job.
Meets all standard requirements for built-up construction using tile or other wall treatments. Neo-corner provides a roomy shower while conserving floor space.
Dimensions 14 - 32x32"
16 - 40x40"
Download Files
SUSSEX - 14, 16 (PDF) / 14-16 (RFA)

ACCESSORIES

WH-2700

Product Details

Accessories
HC, WDA, WS
RDM Collapsible Water Dam (HC, WDA, WS Series) The Collapsible Dam was designed specifically for all type of barrier-free, curbless showes that require water control. Collapses easily by foot or wheelchair, the Collapsible Dam features a strong self-adhesive, water resistant tape bottom that eliminates messy applied adhesives.
Marble Colors: Standard: Black and White Optional: White(-W), Tan (-T) or Pearl Gray (-PG)
Standard Drain: Integral cast 2" brass drain with removable stainless steel strainer plate
Option(s):
Polished Brass Strainer (-PB) 2" drain gasket (TC-2) Vandal Proof Drain (-VP) Collapsible Water Dam (-RDM) Removable Aluminum Ramp (-RRP)