PENTELIC

PENTELIC – SHOWER FLOORS WITH LINEAR DRAIN

WDA-3705-3760

Product Details

PENTELIC - SHOWER FLOORS WITH LINEAR DRAIN
WDA-3705-3760
new ADA compliant linear drain terrazzo shower floor
The 14 gauge stainless steel grate is secured to the terrazzo shower floor. Under the grate is a 2” bottom outlet brass drain which cast integral.
Dimensions
WDA-3705 40x38”/ grate is 5” wide x 36” long
WDA-3730 64x32” / the grate is 5” wide x 60” long
WDA-3760 64x38” / the grate is 5” wide x 60” long
Download File(s)
WDA-3705-3760(PDF) / WDA-3705-3760 Series (RFA)

PENTELIC ROLL-IN TYPE (ADA)

pentelic-3430

Product Details

PENTELIC ROLL-IN TYPE (ADA)
WDA-3430 - WDA-3460
Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor. These shower floors must be set on a level grout or mortar bed.

The intent is to allow a wheelchair patient to remain seated in the wheelchair and roll into the shower. This model must be recessed into the building floor to allow unobstructed wheelchair entry.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). The above models conform to 2010 ADA standards for accessable design and A.117.1–2009.
Inside Deminsions: (A) 36x36" inside, (B) 60x30" inside, (C) 60x36" inside
Dimensions
WDA-3405 - 40x38" (A)
WDA-3430 - 64x32" (B)
WDA-3460 - 64x38" (C)
Download File(s)
WDA-3405-3460 (PDF) / WDA-3400-3460 (RFA)
WDA-3405-3630 (PDF) / WDA-3400-3460 (RFA)

PENTELIC RAMP TYPE (ADA)

WDA-3605

Product Details

WDA-3605, WDA-3630, WDA-3660
WDA-3605 - WDA-3660
Pentelic Roll-In Type Shower Floor with Ramp. Terrazzo's natural non-slip surface provides better footing and increased safety. Wheelchair shower floors are flanged on three sides for a water tight joint between the wall and shower floor. These shower floors must be set on a level grout or mortar bed.

The intent is to allow a wheelchair patient to lift one’s self onto a transfer seat with the assistance of a grab bar. This transfer type shower floor has an integral cast 12” ramp with a running slope of 1:12. A stainless steel cap covers and protects the leading 6” of the ramp. A floor drain by others at the entrance to the sloped threshold and a collapsible water dam (Option: -RDM) are recommended for added protection.
NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). The above models conform to 2010 ADA standards for accessable design and A.117.1–2009.
Inside Deminsions: (A) 36x36" inside, (B) 60x30" inside, (C) 60x36" inside
Dimensions
WDA-3605 - 40x38" (A)
WDA-3630 - 64x32" (B)
WDA-3660 - 64x38" (C)
Download File(s)
WDA-3605, WDA-3630, WDA-3660 (PDF) / WDA-3600-3660 (RFA)