Product Details
Stainless Steel Back Panels
BP-2-28
Hose and Wall Bracket
Add Suffix “BP” to the model number of any Stern-Williams service sink. Protect wallboard against damage and deterioration. The 12” high panels channel water into the basin, cover the face and lower edges of the wallboard, and protect against worker carelessness. Type 304, 20-gauge stainless steel.
Back splash catcher panels of 20 ga. type 304 stainless steel. Shown: BP-2-28
SINGLE PANEL Specify size* 24”, 28”,
32” or 36” *(i.e., BP-1-24”)
TWO PANELS, ONE CORNER Specify
size* 24”, 28”, 32” or 36” square or 24 x 36” *(i.e., BP-2-24”)
THREE PANELS, TWO CORNERS
Specify size* 24”, 28”, 32” or 36” square or 24 x 36” *(i.e., BP-3-24”) Download File(s)
BP (PDF)
Add Suffix “BP” to the model number of any Stern-Williams service sink. Protect wallboard against damage and deterioration. The 12” high panels channel water into the basin, cover the face and lower edges of the wallboard, and protect against worker carelessness. Type 304, 20-gauge stainless steel.
Back splash catcher panels of 20 ga. type 304 stainless steel. Shown: BP-2-28
SINGLE PANEL Specify size* 24”, 28”,
32” or 36” *(i.e., BP-1-24”)
TWO PANELS, ONE CORNER Specify
size* 24”, 28”, 32” or 36” square or 24 x 36” *(i.e., BP-2-24”)
THREE PANELS, TWO CORNERS
Specify size* 24”, 28”, 32” or 36” square or 24 x 36” *(i.e., BP-3-24”) Download File(s)
BP (PDF)
THE HILOW
Product Details
THE HILOW
HL-1800 - HL-2110
These units were developed when the need arose to more efficiently drain power-driven floor maintenance equipment. Their drop front styling allows the janitor to automatically dump waste water.
Made from the same high quality materials as all other Stern-Williams products, the CORLOW and HILOW series have the stainless steel cap cast into the threshold to protect the area of greatest use. In addition, the HILOW series is also available with caps on all horizontal shoulders. Tiling flange may be added to customize any sink to meet your specifications. NOTE: 12" corner type w/drop front.
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
HILOW SQUARE - S.S. Cap on threshold
HL-1800 - 24x24x12"
HL-1900 - 32x32x12"
HL-2000 - 36x36x12"
HILOW SQUARE - S.S. Cap on all sides
HL-1810 - 24x24x12"
HL-1900 - 32x32x12"
HL-2010 - 36x36x12"
HILOW RECTANGULAR - S.S. Cap on threshold
HL-2100 - 36x24x12"
(All Sides)
HL-2110 - 36x24x12"
Download File(s)
HL-1800-2010(PDF) / HL-1800-2000 (RFA), HL-1810-2010 (RFA), HL-2100 (RFA), HL-2110 (RFA)
Made from the same high quality materials as all other Stern-Williams products, the CORLOW and HILOW series have the stainless steel cap cast into the threshold to protect the area of greatest use. In addition, the HILOW series is also available with caps on all horizontal shoulders. Tiling flange may be added to customize any sink to meet your specifications. NOTE: 12" corner type w/drop front.
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
HILOW SQUARE - S.S. Cap on threshold
HL-1800 - 24x24x12"
HL-1900 - 32x32x12"
HL-2000 - 36x36x12"
HILOW SQUARE - S.S. Cap on all sides
HL-1810 - 24x24x12"
HL-1900 - 32x32x12"
HL-2010 - 36x36x12"
HILOW RECTANGULAR - S.S. Cap on threshold
HL-2100 - 36x24x12"
(All Sides)
HL-2110 - 36x24x12"
Download File(s)
HL-1800-2010(PDF) / HL-1800-2000 (RFA), HL-1810-2010 (RFA), HL-2100 (RFA), HL-2110 (RFA)
CLINIC SINK
Product Details
CLINIC SINK
1028
Clinic Sink Base A terrazzo pedestal designed to be used with a vitreous china clinic service sink.
This universal design fits the rough-ins of all major fixture manufacturers, and was created to raise the height of the service sink base to avoid awkward bending. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4”. Download File(s)
1028 (PDF) / 1028 (RFA)
This universal design fits the rough-ins of all major fixture manufacturers, and was created to raise the height of the service sink base to avoid awkward bending. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4”. Download File(s)
1028 (PDF) / 1028 (RFA)
SERVICEPTOR RECTANGULAR
Product Details
SERVICEPTOR RECTANGULAR
SB-300(L, R) - SB-250 Series
The most complete line of terrazzo Serviceptors for corner, recessed, pier or island installations, we offer models in a choice of 4 sizes. All sinks are available with plain shoulders or integrally cast 20 gauge continuous stainless steel cap.
• Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture.
• Brass drain body is cast integral and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws.
• Installs on the finished floor.
Shoulders shall not be less than 9-3/4" high inside measurement, and not less than 1-1/4" wide. Drain shall be cast brass cast integral with removable stainless steel strainer, and shall provide for a casket or a caulked lead connection not less than 1" deep to a 3" pipe. Terrazzo receptor is composed of pearl gray marble chips and white Portland cement, and is ground smooth, grouted, and sealed to resist stains. Stainless steel caps are four pieces of 20 gauge stainless steel and cast integral. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm).
*Flange is across back and on left side on model numbers ending in “L”.
*Flange is across back and on right side on model numbers ending in “R”.
*Tiling flanges are optional, made of stainless steel, and extend 1" above the shoulder on 1, 2, or 3 sides, as required. Dimensions
(With One-Piece Stainless Steel Cap) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-300, SB-301, SB-302L, SB-302R, SB-303- 36x24x12"
(With Plain Shoulders) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-200, SB-201, SB-202L, SB-202R, SB-203 - 36x24x12"
With Four Stainless Steel Caps
SB-250 - 36x24x12"
Download File(s)
Serviceptors Rectangular (PDF) / SB-200 (RFA), SB-300 (RFA),
Serviceptors Four Stainless Steel Caps (PDF) / SB-250 (RFA), SB-450-850 (RFA)
Serviceptors specifications (PDF) / SB-200 (RFA), SB-201-301 (RFA), SB-202-R-302-R (RFA), SB-202-L-302-L (RFA), SB-203-303 (RFA), SB-300 (RFA), SB-400 (RFA), SB-500 (RFA), SB-600 (RFA), SB-700 (RFA), SB-800 (RFA), SB-900 (RFA)
• Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture.
• Brass drain body is cast integral and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws.
• Installs on the finished floor.
Shoulders shall not be less than 9-3/4" high inside measurement, and not less than 1-1/4" wide. Drain shall be cast brass cast integral with removable stainless steel strainer, and shall provide for a casket or a caulked lead connection not less than 1" deep to a 3" pipe. Terrazzo receptor is composed of pearl gray marble chips and white Portland cement, and is ground smooth, grouted, and sealed to resist stains. Stainless steel caps are four pieces of 20 gauge stainless steel and cast integral. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm).
*Flange is across back and on left side on model numbers ending in “L”.
*Flange is across back and on right side on model numbers ending in “R”.
*Tiling flanges are optional, made of stainless steel, and extend 1" above the shoulder on 1, 2, or 3 sides, as required. Dimensions
(With One-Piece Stainless Steel Cap) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-300, SB-301, SB-302L, SB-302R, SB-303- 36x24x12"
(With Plain Shoulders) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-200, SB-201, SB-202L, SB-202R, SB-203 - 36x24x12"
With Four Stainless Steel Caps
SB-250 - 36x24x12"
Download File(s)
Serviceptors Rectangular (PDF) / SB-200 (RFA), SB-300 (RFA),
Serviceptors Four Stainless Steel Caps (PDF) / SB-250 (RFA), SB-450-850 (RFA)
Serviceptors specifications (PDF) / SB-200 (RFA), SB-201-301 (RFA), SB-202-R-302-R (RFA), SB-202-L-302-L (RFA), SB-203-303 (RFA), SB-300 (RFA), SB-400 (RFA), SB-500 (RFA), SB-600 (RFA), SB-700 (RFA), SB-800 (RFA), SB-900 (RFA)
SERVICEPTOR SQUARE
Product Details
SERVICEPTOR SQUARE
SB-200-SB-900 Square Series Mop Basins
The most complete line of terrazzo Serviceptors for corner, recessed, pier or island installations, we offer models in a choice of 4 sizes. All sinks are available with plain shoulders or integrally cast 20 gauge continuous stainless steel cap.
• Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture.
• Brass drain body is cast integral and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws.
• Installs on the finished floor.
Shoulders shall not be less than 9-3/4" high inside measurement, and not less than 1-1/4" wide. Drain shall be cast brass cast integral with removable stainless steel strainer, and shall provide for a gasket or caulked lead connection not less than 1" deep to a 3" pipe. Terrazzo receptor is composed of pearl gray marble chips and white Portland cement, and is ground smooth, grouted, and sealed to resist stains. Stainless steel caps are four pieces of 20 gauge stainless steel and cast integral. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm).
*Tiling flanges are optional, made of stainless steel, and extend 1" above the shoulder on 1, 2, or 3 sides, as required. Dimensions
(With One-Piece Stainless Steel Cap) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-900, SB-901, SB-902, SB-903 - 24x24x12"
SB-700, SB-701, SB-702, SB-703 - 32x32x12"
SB-500, SB-501, SB-502, SB-503 - 36x36x12"
(With Plain Shoulders) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-800, SB-801, SB-802, SB-803 - 24x24x12"
SB-600, SB-601, SB-602, SB-603 - 32x32x12"
SB-500, SB-501, SB-502, SB-503 - 36x36x12"
SB-400, SB-401, SB-402, SB-403 - 36x36x12"
With Four Stainless Steel Caps
SB-850 - 24x24x12"
SB-650, SB-450 - 36x24x12"
Download File(s)
SB-200, SB-300, SB-400, SB-500, SB-600, SB-700, SB-800, SB-900 Series Serviceptors (PDF)
SB-200 (RFA), SB-300 (RFA) SB-400 (RFA), SB-500 (RFA), SB-600 (RFA), SB-700 (RFA), SB-800 (RFA), SB-900 (RFA)
Serviceptors Four Stainless Steel Caps (PDF)
SB-250 (RFA), SB-450-850 (RFA)
• Terrazzo composed of pearl gray marble chips cast in white Portland cement which produces a compressive strength of 3000 PSI seven days after casting; then ground smooth, grouted and sealed to resist stains and moisture.
• Brass drain body is cast integral and provides for a caulked connection of not less that 1" deep to a 3" pipe. Drain is centered on all models and comes with a flat stainless steel strainer and screws.
• Installs on the finished floor.
Shoulders shall not be less than 9-3/4" high inside measurement, and not less than 1-1/4" wide. Drain shall be cast brass cast integral with removable stainless steel strainer, and shall provide for a gasket or caulked lead connection not less than 1" deep to a 3" pipe. Terrazzo receptor is composed of pearl gray marble chips and white Portland cement, and is ground smooth, grouted, and sealed to resist stains. Stainless steel caps are four pieces of 20 gauge stainless steel and cast integral. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm).
*Tiling flanges are optional, made of stainless steel, and extend 1" above the shoulder on 1, 2, or 3 sides, as required. Dimensions
(With One-Piece Stainless Steel Cap) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-900, SB-901, SB-902, SB-903 - 24x24x12"
SB-700, SB-701, SB-702, SB-703 - 32x32x12"
SB-500, SB-501, SB-502, SB-503 - 36x36x12"
(With Plain Shoulders) The last digit of the model number indicates Numbers of Flange(s)(ie: 1, 2 & 3).
SB-800, SB-801, SB-802, SB-803 - 24x24x12"
SB-600, SB-601, SB-602, SB-603 - 32x32x12"
SB-500, SB-501, SB-502, SB-503 - 36x36x12"
SB-400, SB-401, SB-402, SB-403 - 36x36x12"
With Four Stainless Steel Caps
SB-850 - 24x24x12"
SB-650, SB-450 - 36x24x12"
Download File(s)
SB-200, SB-300, SB-400, SB-500, SB-600, SB-700, SB-800, SB-900 Series Serviceptors (PDF)
SB-200 (RFA), SB-300 (RFA) SB-400 (RFA), SB-500 (RFA), SB-600 (RFA), SB-700 (RFA), SB-800 (RFA), SB-900 (RFA)
Serviceptors Four Stainless Steel Caps (PDF)
SB-250 (RFA), SB-450-850 (RFA)
MTB RECTANGULAR
Product Details
MTB RECTANGULAR
MTB-3624
The MTB was designed to fill the need for a mop sink in a lower price range, but with good splash protection. It is normally not equipped with tiling flanges, so sealant should be applied where basin meets the wall. Flanges are available upon request. Each exposed side can be equipped with vinyl or aluminum bumper guards, OR cast integral stainless steel caps. Please see the accessories section for additional information on the bumper guards. We produce the MTB in two sizes, both of which have 3" centered brass drains cast integral and a stainless steel dome strainer and screws.
NOTE:
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). 10" type.
Dimensions
MTB-3624 - 36x24x10"
Download File(s)
MTB-3624 (PDF) / MTB-3624 (RFA)
MTB-3624 - 36x24x10"
Download File(s)
MTB-3624 (PDF) / MTB-3624 (RFA)
MTB SQUARE
Product Details
MTB SQUARE
MTB-2424
The MTB was designed to fill the need for a mop sink in a lower price range, but with good splash protection. It is normally not equipped with tiling flanges, so sealant should be applied where basin meets the wall. Flanges are available upon request. Each exposed side can be equipped with vinyl or aluminum bumper guards, OR cast integral stainless steel caps. Please see the accessories section for additional information on the bumper guards. We produce the MTB in two sizes, both of which have 3" centered brass drains cast integral and a stainless steel dome strainer and screws.
NOTE:
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). 10" type. Dimensions
MTB-2424 - 24x24x10"
Download File(s)
MTB-2424 Square(PDF) / MTB-2424 (RFA)
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). 10" type. Dimensions
MTB-2424 - 24x24x10"
Download File(s)
MTB-2424 Square(PDF) / MTB-2424 (RFA)
ELFIN RECTANGULAR
Product Details
ELFIN
EBR-66 - EBR-74
The ELFIN is a rugged economical unit with plain curbs on all sides. It is installed quickly in one single operation on the finished floor. All models except the corner unit come with a 3" centered brass drain with removable flat stainless steel strainer and screws. The drain for the corner model is located 12" off the back walls to help avoid spills. This unit can be furnished with aluminum or vinyl bumper guards, OR cast integral stainless steel caps, on the exposed sides of the basin. Please see the accessories section for additional information on the bumper guards.
The ELFIN is available in four square models, one rectangular, and one corner model.
NOTE:
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm).
Dimensions
EBR-66 - 36x24x6"
EBR-74 - 36x32x6"
Download File(s)
EBR 66, EBR 74 (PDF) /
EBR-66-74 (RFA)
EBR 66-74 (PDF) /
EBR-66-74 (RFA)
ELFIN SQUARE
Product Details
ELFIN
EB-54 - EB-78
The ELFIN is a rugged economical unit with plain curbs on all sides. It is installed quickly in one single operation on the finished floor. All models except the corner unit come with a 3" centered brass drain with removable flat stainless steel strainer and screws. The drain for the corner model is located 12" off the back walls to help avoid spills. This unit can be furnished with aluminum or vinyl bumper guards, OR cast integral stainless steel caps, on the exposed sides of the basin. Please see the accessories section for additional information on the bumper guards.
The ELFIN is available in four square models, one rectangular, and one corner model. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
EB-54 - 24x24x6"
EB-66 - 30x30x6"
EB-70 - 32x32x6"
EB-78 - 36x36x6"
Download File(s)
EB-54,66,70,78 (PDF) / EB-54-78 (RFA)
EB-54,66,70,78 (PDF) / EB-54-78 (RFA)
The ELFIN is available in four square models, one rectangular, and one corner model. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
EB-54 - 24x24x6"
EB-66 - 30x30x6"
EB-70 - 32x32x6"
EB-78 - 36x36x6"
Download File(s)
EB-54,66,70,78 (PDF) / EB-54-78 (RFA)
EB-54,66,70,78 (PDF) / EB-54-78 (RFA)
ELFIN NEO-CORNER
Product Details
ELFIN
EBC-150
The ELFIN is a rugged economical unit with plain curbs on all sides. It is installed quickly in one single operation on the finished floor. All models except the corner unit come with a 3" centered brass drain with removable flat stainless steel strainer and screws. The drain for the corner model is located 12" off the back walls to help avoid spills. This unit can be furnished with aluminum or vinyl bumper guards, OR cast integral stainless steel caps, on the exposed sides of the basin. Please see the accessories section for additional information on the bumper guards.
The ELFIN is available in four square models, one rectangular, and one corner model. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
EBC-150 - 36x36x6"
Download File(s)
EBC-150 (PDF) / EBC-150 (RFA)
The ELFIN is available in four square models, one rectangular, and one corner model. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). Dimensions
EBC-150 - 36x36x6"
Download File(s)
EBC-150 (PDF) / EBC-150 (RFA)
CRESCENT
Product Details
CRESCENT
CRS-2200 - CRS-2202
The CRESCENT CRS-2200 was designed around the two features most sought after by today's style and function conscious specifications.
SPACE EFFICIENT - radial designed corner model that occupies minimum floor space.
MAXIMUM UTILITY - front drop with stainless steel cap that facilitates dumping of power equipment and reduces lifting of conventional equipment. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). 12" radial type. Dimensions
CRESCENT - 6" front drop without Stainless Steel Cap
CRS-2210 - 28x28x12"
CRESCENT - 6" front drop with Stainless Steel Cap
CRS-2200 - 28x28x12"
CRS-2202* - 28x28x12"
*With two tiling flanges Download File(s)
CRS-2200, CRS-2210, CRS-2202 (PDF) / CRS-2200 (RFA), CRS-2210 (RFA)
SPACE EFFICIENT - radial designed corner model that occupies minimum floor space.
MAXIMUM UTILITY - front drop with stainless steel cap that facilitates dumping of power equipment and reduces lifting of conventional equipment. NOTE: All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm). 12" radial type. Dimensions
CRESCENT - 6" front drop without Stainless Steel Cap
CRS-2210 - 28x28x12"
CRESCENT - 6" front drop with Stainless Steel Cap
CRS-2200 - 28x28x12"
CRS-2202* - 28x28x12"
*With two tiling flanges Download File(s)
CRS-2200, CRS-2210, CRS-2202 (PDF) / CRS-2200 (RFA), CRS-2210 (RFA)
CORNARO
Product Details
CORNARO
SBC-1500 - SBC-1450
The CORNARO with its unique style adds a modern look to any of today's architectural concepts.
All the features found in our Serviceptor line are found in this model. The one-piece construction insures water tightness, and its modern style occupies less floor space. It is composed of gray marble chips and Portland cement, ground smooth, grouted, and sealed to resist stains and moisture.
The stainless steel cap is of one-piece 20-gauge stainless steel cast integral on all sides. The CORNARO with the stainless steel cap is Series SBC-1500 . . . without the stainless steel cap, SBC-1400.
The CORNARO can also be furnished with tiling flanges on two sides. It is then identified as SBC-1502, or SBC-1402. NOTE: 12" corner type no drop front. Dimensions
CORNARO - with Stainless Steel Cap
SBC-1500 - 24x24x12"
SBC-1502* - 24x24x12"
SBC-1525 - 36x36x12"
SBC-1550 - 36x36x12"
*With two tiling flanges
CORNARO - without Cap
SBC-1400 - 24x24x12"
SBC-1402* - 24x24x12"
HSBC-1425 - 32x32x12"
SBC-1450 - 36x36x12"
Download File(s)
SBC-1400-1550 (PDF) / SBC-1400-1450 (RFA), SBC-1500-1550 (RFA)
All the features found in our Serviceptor line are found in this model. The one-piece construction insures water tightness, and its modern style occupies less floor space. It is composed of gray marble chips and Portland cement, ground smooth, grouted, and sealed to resist stains and moisture.
The stainless steel cap is of one-piece 20-gauge stainless steel cast integral on all sides. The CORNARO with the stainless steel cap is Series SBC-1500 . . . without the stainless steel cap, SBC-1400.
The CORNARO can also be furnished with tiling flanges on two sides. It is then identified as SBC-1502, or SBC-1402. NOTE: 12" corner type no drop front. Dimensions
CORNARO - with Stainless Steel Cap
SBC-1500 - 24x24x12"
SBC-1502* - 24x24x12"
SBC-1525 - 36x36x12"
SBC-1550 - 36x36x12"
*With two tiling flanges
CORNARO - without Cap
SBC-1400 - 24x24x12"
SBC-1402* - 24x24x12"
HSBC-1425 - 32x32x12"
SBC-1450 - 36x36x12"
Download File(s)
SBC-1400-1550 (PDF) / SBC-1400-1450 (RFA), SBC-1500-1550 (RFA)
THE CORLOW
Product Details
THE CORLOW
SBC-1700 - SBC-1750
These units were developed when the need arose to more efficiently drain power-driven floor maintenance equipment. Their drop front styling allows the janitor to automatically dump waste water.
Made from the same high quality materials as all other Stern-Williams products, the CORLOW and HILOW series have the stainless steel cap cast into the threshold to protect the area of greatest use. In addition, the HILOW series is also available with caps on all horizontal shoulders. Tiling flange may be added to customize any sink to meet your specifications. NOTE: 12" corner type w/drop front.
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm) Dimensions
CORLOW - S.S. Cap on threshold
SBC-1700 - 24x24x12"
SBC-1725 - 32x32x12"
SBC-1750 - 36x36x12"
Download File(s)
SBC-1700-1750 (PDF) / SBC-1700-1750 (RFA)
Made from the same high quality materials as all other Stern-Williams products, the CORLOW and HILOW series have the stainless steel cap cast into the threshold to protect the area of greatest use. In addition, the HILOW series is also available with caps on all horizontal shoulders. Tiling flange may be added to customize any sink to meet your specifications. NOTE: 12" corner type w/drop front.
All dimensions subject to manufacturing variance of plus or minus 1/4" (6 mm) Dimensions
CORLOW - S.S. Cap on threshold
SBC-1700 - 24x24x12"
SBC-1725 - 32x32x12"
SBC-1750 - 36x36x12"
Download File(s)
SBC-1700-1750 (PDF) / SBC-1700-1750 (RFA)
ACCESSORIES
Product Details
Accessories
C-10
Silaprene Sealant
Silaprene Sealant, to close wall seams on receptors with flanges.
Silaprene Sealant, to close wall seams on receptors with flanges.
ACCESSORIES
Product Details
Accessories
T-15-VB - T-10-VB
Sink Fitting
Sink fitting, the same as T-10-VB with Polished Chrome finish.
T-10-VB Sink fitting with integral stops, lever handles and spring checks. Spout with bucket hook, 3/4” hose thread end. Vacuum breaker; adjustable top brace. Inlets 8” on centers. Chrome finish.
T-10-VB Manufactured before 3/07, Manufactured after 3/07, Disrtributed after 11/1/12. Sink fitting with integral stops, lever handles and spring checks. Spout with bucket hook, 3/4” hose thread end. Vacuum breaker; adjustable top brace. Inlets 8” on centers. Chrome finish.
T-15-VB Manufactured before 3/07, Manufactured after 3/07, Disrtributed after 11/1/12. Same as T-10-VB with polished Chrome finish. Download File(s)
T-10-VB & T-15-VB (PDF) Manufactured 9/87 – 7/99 T-10-VB & T-15-VB (PDF) Manufactured 7/99 - 3/07 T-10-VB & T-15-VB (PDF) Manufactured 3/07 – 10/12 T-10-VB & T-15-VB (PDF) Manufactured 1/12 T-10-VB & T-15-VB (PDF) Manufactured 11/12 T-10-15 VB Series (RFA)
Sink fitting, the same as T-10-VB with Polished Chrome finish.
T-10-VB Sink fitting with integral stops, lever handles and spring checks. Spout with bucket hook, 3/4” hose thread end. Vacuum breaker; adjustable top brace. Inlets 8” on centers. Chrome finish.
T-10-VB Manufactured before 3/07, Manufactured after 3/07, Disrtributed after 11/1/12. Sink fitting with integral stops, lever handles and spring checks. Spout with bucket hook, 3/4” hose thread end. Vacuum breaker; adjustable top brace. Inlets 8” on centers. Chrome finish.
T-15-VB Manufactured before 3/07, Manufactured after 3/07, Disrtributed after 11/1/12. Same as T-10-VB with polished Chrome finish. Download File(s)
T-10-VB & T-15-VB (PDF) Manufactured 9/87 – 7/99 T-10-VB & T-15-VB (PDF) Manufactured 7/99 - 3/07 T-10-VB & T-15-VB (PDF) Manufactured 3/07 – 10/12 T-10-VB & T-15-VB (PDF) Manufactured 1/12 T-10-VB & T-15-VB (PDF) Manufactured 11/12 T-10-15 VB Series (RFA)
ACCESSORIES
Product Details
Accessories
T-35
Hose and Wall Bracket
Hose and wall bracket. 36" hose with 3/4" chrome coupling. Type 302 stainless stell bracket with spring loaded rubber grip.
Hose and wall bracket. 36" hose with 3/4" chrome coupling. Type 302 stainless stell bracket with spring loaded rubber grip.
ACCESSORIES
Product Details
Accessories
T-40
Stainless Steel Mop Hanger
Stainless steel mop hanger, #4 finish. 24" length with 3 spring loaded rubber grips.
Stainless steel mop hanger, #4 finish. 24" length with 3 spring loaded rubber grips.
ACCESSORIES
Product Details
Accessories
TC-2 - TC-3-2
Speedi Drain Connectors - Shower Drain Gasket
For schedule 40 steel pipe, PVC, ABS and C.I. pipe.
Mop Sink Drain Gaskets
TC-3 -3” For XHCI, plastic and steel pipe.
TC-3-NH -3” For SV and NHCI pipe.
TC-3-2 - 3” Reducer with 2” hole.
Use only with Stern-Williams shower floors and mop sinks.
For schedule 40 steel pipe, PVC, ABS and C.I. pipe.
Mop Sink Drain Gaskets
TC-3 -3” For XHCI, plastic and steel pipe.
TC-3-NH -3” For SV and NHCI pipe.
TC-3-2 - 3” Reducer with 2” hole.
Use only with Stern-Williams shower floors and mop sinks.
ACCESSORIES
Product Details
Accessories
V-70
Optional Cap
Extruded vinyl bumper guard. (24, 32 or 36”)
Extruded vinyl bumper guard. (24, 32 or 36”)
ACCESSORIES
Product Details
Accessories
A-20
Optional Cap
Anodized aluminum cap. (24, 32 or 36”) V-70 Extruded
Anodized aluminum cap. (24, 32 or 36”) V-70 Extruded